If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi guys. Can anyone give me an idea of rail pressure at idle and under load on the new 2.8l diesel please? Bought a cheap scantool but it seems to be giving some strange readouts in some areas, the rail being one.
Thanks.
Well well. I found the answer. In the engine section there is an article on the engine which says that injection pressure {rail pressure I guess} is 35-220 Mpa. That converts to 5000 - 31900 psi. I guess 5000 at idle and 31900 at full acceleration. Exactly what I;m getting. Any comment welcome.. Thanks for the input. cheers.
Hunteroz. What revs and gear etc are you hitting the 32k psi? I thought it would be at 1500 rpm approx, max torgue, but I get it at about 3500 or max power. That's in 3rd gear as trying it in higher gears breaks our speed limits.
Cheers.
Comment